The clear 2.4" full-color HD TFT display shows waveforms and measured values in a readable, easy-to-understand way. Button control (including RUN/HOLD) speeds up work during diagnostics both in the field and on the bench.
The oscilloscope mode offers a 10 MS/s sampling rate and 500 kHz bandwidth, including automatic measurements (Vmax, Vmin, Vrms, Vpp, frequency, period, and duty cycle). A 1 kHz calibration signal for probe compensation is also included.
The integrated tester automatically identifies and measures common active and passive components (e.g., transistors, MOSFETs, resistors, capacitors, inductors) and displays their parameters. The practical design with a connector area on the front makes quick connections easy.
FNIRSI DSO-TC3 is a practical pocket helper for service, teaching, and laboratory measurement. In oscilloscope mode, it provides clear waveform display and automatic calculations (Vmax, Vmin, Vpp, Vrms, frequency, etc.), so you can quickly get oriented even without lengthy setup. Thanks to the AUTO button, trigger modes Auto/Normal/Single, and the HOLD function to freeze the waveform, work is fast and clear.
The integrated component tester automatically identifies and measures a wide range of parts – from resistors, capacitors, and coils to transistors, MOSFETs, or thyristors – including lead detection and parameter display. The built-in DDS generator additionally creates 6 signal types (e.g., sine, square, triangle) in the range from 1 Hz to 100 kHz, which is useful for simulation and testing of circuits without additional equipment.
Main advantages:
Package contents: FNIRSI DSO-TC3 oscilloscope, measuring probe, 3 measuring clips, USB-C cable, user manual.
